2023
Hierarchical bubble size distributions in coarsening wet liquid foams
Galvani N., Pasquet M., Mukherjee A., Requier A., Cohen-Addad S., Pitois O., Höhler R., Rio E., Salonen A., Durian D.J., Langevin D.
PNAS (2023) 120, e230655112
Aqueous foams in microgravity, measuring bubble sizes
Pasquet M., Galvani N., Pitois O., Cohen-Addad S., Höhler R., Chieco A.T., Dillavou S., Hanlan J.M., Durian D.J., Rio E., Salonen A., Langevin D.
C. R. Méc. (2023) 351, 1–23
A refined Morphological Representative Pattern approach to the behavior of polydisperse highly-filled inclusion–matrix composites
Vu T.-S., Tran B.-V., Nguyen H.-Q., Chateau X.
International Journal of Solids and Structures (2023) 270, 112253
Coarsening transitions of wet liquid foams under microgravity conditions
Pasquet M., Galvani N., Requier A., Cohen-Addad S., Höhler R., Pitois O., Rio E., Salonen A., Langevin D.
Soft Matter (2023) 19, 6267-6279
Daisy-shaped liquid bridges in foam-filled granular packings
Pitois O., Salamé A., Khidas Y., Ceccaldi M., Langlois V., Vincent-Bonnieu S.
Journal of Colloid and Interface Science (2023) 638, 552-560
Liquid relative permeability through foam-filled porous media: Experiments
Ceccaldi M., Langlois V., Guéguen M., Grande D., Vincent-Bonnieu S., Pitois O.
Phys. Rev. Fluids (2023) 8, 024302
Pressure threshold for inhibition of dense granular film opening
Retailleau N., Khidas Y., Rouyer F.
RSC Advances (2023) 13, 30905-30914
Printing by yield stress fluid shaping
Geffrault A., Bessaies-Bey H., Roussel N., Coussot P.
Additive Manufacturing (2023) 75, 103752
Fast transport diffusion of bound water in cellulose fiber network
Zou Y., Maillet B., Brochard L., Coussot P.
Cellulose (2023) 30, 7463-7478
Slow spreading with a large contact angle on hygroscopic materials
Julien E., Rubinstein S.M., Caré S., Coussot P.
Soft Matter (2023) 19, 3475-3486
Instant yield stress measurement from falling drop size: The “syringe test"
Geffrault A., Bessaies-Bey H., Roussel N., Coussot P.
Journal of Rheology (2023) 67, 305-314
Cohesion and aggregates in unsaturated wet granular flows down a rough incline
Deboeuf S., Fall A.
Journal of Rheology (2023) 67, 909-922
Viscous dissipation in large amplitude oscillatory shear of unsaturated wet granular matter
Awdi A., Chateau C., Chevoir F., Roux J.-N., Fall A.
Journal of Rheology (2023) 67, 365-372
Analytical modelling of complex stiffness modulus tests in direct tension-compression on asphalt concrete and nonlinearity effect due to strain amplitude
Coulon L., Koval G., Chazallon C., Roux J.-N.
Road Materials and Pavement Design (2023) 24, 216-246
Life cycle assessment of a concrete 3D printing process
Roux C., Kuzmenko K., Roussel N., Mesnil R., Feraille A.
The International Journal of Life Cycle Assessment (2023) 28, 1–15
Virgo detector characterization and data quality: results from the O3 run
Acernese F., …, Lemaître A, Puosi F., et al.
Class. Quantum Grav. (2023) 40 185006
Structure and Mechanical Properties of a Porous Polymer Material via Molecular Dynamics Simulations
Volpe S. C., Leporini D., Puosi F.
Polymers (2023) 15, 358
Determination of stress in thin films using micro-machined buckled membranes
Malhaire C., Granata M., Hofman D., Amato A., Martinez V., Cagnoli G., Lemaître A., Shcheblanov N.
Vac. Sci. Technol. A (2023) 41, 043401
Population of Merging Compact Binaries Inferred Using Gravitational Waves through GWTC-3
Abbott R., …, Lemaître A, et al. (LIGO Scientific Collaboration, Virgo Collaboration, and KAGRA Collaboration)
Phys. Rev. X (2023) 13, 011048
2022
Influence of the Immune Microenvironment Provided by Implanted Biomaterials on the Biological Properties of Masquelet-Induced Membranes in Rats: Metakaolin as an Alternative Spacer
Durand M., Oger M., Nikovics K., Venant J., Guillope A.-C., Jouve E., Barbier L., Bégot L., Poirier F., Rousseau C., Pitois O., Mathieu L., Favier A.-L., Lutomski D., Collombet J.-M.
Biomedicines (2022) 10, 3017
Stiffening colloidal gels by solid inclusions
Ferreiro-Córdova C., Foffi F., Pitois O., Guidolin C., Schneider M., Salonen A.
Soft Matter (2022) 18, 2842-2850
Vapor-sorption Coupled Diffusion in Cellulose Fiber Pile Revealed by Magnetic Resonance Imaging
Ma X., Maillet B., Brochard L., Pitois O., Sidi-Boulenouar R., Coussot P.
Phys. Rev. Applied (2022) 17, 024048
High-frequency permeability of porous media with thin constrictions. I. Wedge-shaped porous media
Langlois V.
Physics of Fluids (2022) 34, 077119
High-frequency permeability of porous media with thin constrictions. II. Porous media containing thin holed membranes
Langlois V., Nguyen C.T., Perrot C.
Physics of Fluids (2022) 34, 077120
Polydisperse solid foams: Multiscale modeling and simulations of elasto-acoustic properties including thin membrane effects
Nguyen C.T., Langlois V., Guilleminot J., Detrez F., Duval A., Bornert M., Aimedieu P., Perrot C.
International Journal of Solids and Structures (2022) 249, 111684
Dynamic NMR Relaxometry as a Simple Tool for Measuring Liquid Transfers and Characterizing Surface and Structure Evolution in Porous Media
Maillet B., Sidi-Boulenouar R., Coussot P.
Langmuir (2022) 38, 15009-15025
Diffusionlike Drying of a Nanoporous Solid as Revealed by Magnetic Resonance Imaging
Maillet B., Dittrich G., Huber P., Coussot P.
Phys. Rev. Applied (2022) 18, 054027
Two-step diffusion in cellular hygroscopic (vascular plant-like) materials
Cocusse M., Rosales M., Maillet B., Sidi-Boulenouar R., Julien E., Caré S., Coussot P.
Sci. Adv. (2022) 8, eabm7830
Unexpected Slow Kinetics of Poly(Methacrylic Acid) Phase Separation in the Semi-Dilute Regime
Robin C., Lorthioir C., Fall A., Ovarlez G., Amiel C., Le Coeur C.
Polymers (2022) 14, 4708
Tuneable normal stresses in hyperelastic emulsions
Fall A., Tighe B.P., Bonn D.
Phys. Rev. Research (2022) 4, 013167
Adsorption of poly(methacrylic acid) onto differently charged silica nanoparticles and its consequences on particles clustering
Robin C., Lorthioir C., Erman A., Perez J., Fall A., Ovarlez G., Amiel C., Le Coeur C.
Colloids and Surfaces A: Physicochemical and Engineering Aspects (2022) 638, 128287
Sliding friction perturbed by shear ultrasound vibrations: dynamic lubrication and overaging
Léopoldès J.
The European Physical Journal E (2022) 45, 99
Tuning local microstructure of colloidal gels by ultrasound-activated deformable inclusions
Saint-Michel B., Petekidis G., Garbin V.
Soft Matter (2022) 18, 2092-2103
How many modes are needed to predict climate bifurcations? Lessons from an experiment
Dubrulle B., Daviaud F., Faranda D., Marié L., Saint-Michel B.
Nonlinear Processes in Geophysics (2022) 29, 17-35
Yield Stress Aging in Attractive Colloidal Suspensions
Bonacci F., Château X, Furst E.M., Goyon J., Lemaître A.
Phys. Rev. Lett. (2022) 128, 018003
Environmental impact of extrusion-based additive manufacturing: generic model, power measurements and influence of printing resolution
Kuzmenko K., Ducoulombier N., Feraille A., Roussel A.
Cement and Concrete Research (2022) 157, 106807
Slow penetration for characterizing concrete for digital fabrication
Reiter L., Wangler T., Roussel N., Flatt R.J.
Cement and Concrete Research (2022) 157, 106802
Layer pressing in concrete extrusion-based 3D-printing: Experiments and analysis
Carneau P., Mesnil R., Baverel O., Roussel N.
Cement and Concrete Research (2022) 155, 106741
Material-process interactions in particle bed 3D printing and the underlying physics
Lowke D., Mai I., Keita E., Perrot A., Weger D., Gehlen C., Herding F., Zuo W., Roussel N.
Cement and Concrete Research (2022) 156, 106748
Capillary imbibition depth in particle-bed 3D printing – Physical frame and one-dimensional experiments
Zuo W., Dong C., Belin P., Roussel N., Keita E.
Cement and Concrete Research (2022) 156, 106740
A new mix design method for low-environmental-impact blended cementitious materials: Optimization of the physical characteristics of powders for better rheological and mechanical properties
Ahmadah O., Bessaies-Bey H., Yahia A., Roussel N.
Cement and Concrete Composites (2022) 128, 104437
Decrease of the amount of fat in chocolate at constant viscosity by optimizing the particle size distribution of chocolate
Deou J., Bessaies-Bey H., Declercq F., Smith P., Debon S., Wallecan J., Roussel N.
Food Structure (2022) 31, 100253
Viscosity modifying agents: Key components of advanced cement-based materials with adapted rheology
Bessaies-Bey H., Khayat K.H., Palacios M., Schmidt W., Roussel N.
Cement and Concrete Research (2022) 152, 106646
Plastic ridge formation in a compressed thin amorphous film
Cordella G., Puosi F., Tripodo A., Leporini D., Lemaître A.
Phys. Rev. Materials (2022) 6, L122601
Fractional Coupling of Primary and Johari–Goldstein Relaxations in a Model Polymer
Massa C. A., Puosi F., Leporini D.
Polymers (2022) 14, 5560
Measurement and Simulation of Mechanical and Optical Properties of Sputtered Amorphous SiC Coatings
Favaro G., Bazzan M., Amato A., Arciprete F., Cesarini E., Corso A.J., De Matteis F., Dao T.H., Granata M., Honrado-Benítez C., Gutiérrez-Luna N., Larruquert J.I., Lorenzin G., Lumaca D., Maggioni G., Magnozzi M., Pelizzo M.G., Placidi E., Prosposito P., Puosi F.
Phys. Rev. Applied (2022) 18, 044030
2021
A new foam-based method for the (bio)degradation of hydrocarbons in contaminated vadose zone,
Bouzid I., Pino Herrera D., Dierick M., Pechaud Y., Langlois V., Albaric J., Fatin-Rouge N.,
Journal of Hazardous Materials (2021) 401, 123420
Wood-Mimicking Bio-Based Biporous Polymeric Materials with Anisotropic Tubular Macropores
Srikanthan V., Pitois O., Coussot P., Le Droumaguet B., Grande D.
Polymers (2021) 13, 2692
Marginal regeneration-induced drainage of surface bubbles
Miguet J., Pasquet M., Rouyer F., Fang Y., Rio E.
Phys. Rev. Fluids (2021) 6, L101601
The Life of a Surface Bubble
Miguet J., Rouyer F., Rio E.
Molecules (2021) 26, 1317
Extensional gravity-rheometry (EGR) for yield stress fluids
Geffrault A., Bessaies-Bey H., Roussel N., Coussot P.
Journal of Rheology (2021) 65, 887-901
Yielding and rheopexy of aqueous xanthan gum solutions
N’gouamba E., Essadik M., Goyon J., Oerther T., Coussot P.
Rheological Acta (2021) 60, 653-660
Oldroyd’s model and the foundation of modern rheology of yield stress fluids
Coussot P. Rogers S.A.
Journal of Non-Newtonian Fluid Mechanics (2021) 295, 104604
Understanding mechanisms of drying of a cellulose slurry by magnetic resonance imaging
Ben Abdelouahab N., Gossard A., Ma X., Dialla H., Maillet M., Rodts S., Coussot P.
Cellulose (2021) 28, 5321-5334
Mechanisms of liquid imbibition in Douglas-fir inferred from 1H nuclear magnetic resonance methods
Nguyen D.M., Care S., Courtier-Murias D., Zhou M., Coussot P.
Holzforschung (2021) 75, 225-236
Towards the End of Drying of Granular Materials: Enhanced Evaporation and Drying-Induced Collapse
Wang Z., Maillet B., Pereira J.-M., Gan Y.
Water Ressources Research (2021) 57, e2021WR030125
Analytical modelling of thixotropy contribution during T/C fatigue tests of asphalt concrete with the VENoL model
Coulon L., Koval G., Chazallon C., Roux J.-N.
Road Materials and Pavement Design (2021) 22, S536-S559
Filament geometry control in extrusion-based additive manufacturing of concrete: The good, the bad and the ugly
Wolfs R.J.M., Salet T.A.M., Roussel N.
Cement and Concrete Research (2021) 150, 106615
From analytical methods to numerical simulations: A process engineering toolbox for 3D concrete printing
Perrot A., Pierre A., Nerella V.N., Wolfs R.J.M., Keita E., Nair S.A.O., Neithalath N., Roussel N., Mechtcherine V.
Cement and Concrete Composites (2021) 122, 104164
A first-order physical model for the prediction of shear-induced particle migration and lubricating layer formation during concrete pumping
Fataei S., Secrieru E., Mechtcherine V., Roussel N.
Cement and Concrete Research (2021) 147, 106530
The “Slugs-test” for extrusion-based additive manufacturing: Protocol, analysis and practical limits
Ducoulombier N., Mesnil R., Carneau P., Demont L., Bessaies-Bey H., Caron J.-F., Roussel N.
Cement and Concrete Composites (2021) 121, 104074
Polycarboxylate ester adsorption on cement grains: Influence of polydispersity
Bessaies-Bey H., Massoussi N., Mulik S., Baumann R., Schmitz M., Radler M., Gelardi G., Flatt R.J., Roussel N.
Cement and Concrete Research (2021) 143, 106383
Influence of mixing on the generation of nanoparticles in cement systems
Vandenberg A., Bessaies-Bey H., Wille K., Roussel N.
Cement and Concrete Research (2021) 143, 106379
Robustness of cement-based materials: From dosage variations to yield stress fluctuations
Zuo W., Bessaies-Bey H., Tian Q., Miao C., Roussel N.
Cement and Concrete Research (2021) 139, 106260
All-sky search for continuous gravitational waves from isolated neutron stars in the early O3 LIGO data
Abbott R., …, Lemaître A, et al. (LIGO Scientific Collaboration, Virgo Collaboration, and KAGRA Collaboration)
Phys. Rev. D (2021) 104, 082004
Search for anisotropic gravitational-wave backgrounds using data from Advanced LIGO and Advanced Virgo’s first three observing runs
Abbott R., …, Lemaître A, et al. (LIGO Scientific Collaboration, Virgo Collaboration, and KAGRA Collaboration)
Phys. Rev. D (2021) 104, 022005
Upper limits on the isotropic gravitational-wave background from Advanced LIGO and Advanced Virgo’s third observing run
Abbott R., …, Lemaître A, et al. (LIGO Scientific Collaboration, Virgo Collaboration, and KAGRA Collaboration)
Phys. Rev. D (2021) 104, 022004
Observation of Gravitational Waves from Two Neutron Star–Black Hole Coalescences
Abbott R., …, Lemaître A, et al.
ApJL (2021) 915 L5
Constraints on Cosmic Strings Using Data from the Third Advanced LIGO–Virgo Observing Run
Abbott R., …, Lemaître A, et al. (LIGO Scientific Collaboration, Virgo Collaboration, and KAGRA Collaboration)
Phys. Rev. Lett. (2021) 126, 241102
Diving below the Spin-down Limit: Constraints on Gravitational Waves from the Energetic Young Pulsar PSR J0537-6910
Abbott R., …, Lemaître A, et al.
ApJL (2021) 913 L27
All-sky search in early O3 LIGO data for continuous gravitational-wave signals from unknown neutron stars in binary systems
Abbott R., …, Lemaître A, et al. (The LIGO Scientific Collaboration and the Virgo Collaboration)
Phys. Rev. D (2021) 103, 064017
Stress hyperuniformity and transient oscillatory-exponential correlation decay as signatures of strength vs fragility in glasses
Lemaître A.
Chem. Phys. (2021) 155, 194501
Anomalous elasticity and plastic screening in amorphous solids
Lemaître A., Mondal C., Moshe M., Procaccia I., Roy S., Screiber-Re’em K.
Phys. Rev. E (2021) 104, 024904
Stress correlations in frictional granular media
Lemaître A., Mondal C., Procaccia I., Roy S.
Phys. Rev. B (2021) 103, 054110
Frictional Granular Matter: Protocol Dependence of Mechanical Properties
Lemaître A., Mondal C., Procaccia I., Roy S., Wang Y., Zhang J.
Phys. Rev. Lett. (2021) 126, 075501
Effects of the annealing of amorphous Ta2O5 coatings produced by ion beam sputtering concerning the effusion of argon and the chemical composition
Paolone A., Placidi E., Stellino E., Betti M.G., Majorana E., Mariani C., Nucara A., Palumbo O., Postorino P., Rago I., Trequattrini F., Granata M., Teillon J., Hofman D., Michel C., Lemaître A., Shcheblanov N., Cagnoli G., Ricci F.
Journal of Non-Crystalline Solids (2021) 557, 120651
2020
Propagation and adsorption of nanoparticles in porous medium as traveling waves
Gerber G., Weitz D.A., Coussot P.
Phys. Rev. Research (2020) 2, 033074
Probing intermittency and reversibility in a dense granular suspension under shear using multiply scattered ultrasound
Léopoldès J., Jia X.
Soft Matter (2020) 16, 10716-10722
Rejuvenation and shear banding in model amorphous solids,
Barbot A., Lerbinger M., Lemaître A., Vandembroucq D., Patinet S.,
Phys. Rev. E (2020) 101, 033001
Origin of the bauschinger effect in amorphous solids,
Patinet S., Barbot A., Lerbinger M., Vandembroucq D., Lemaître A.,
Phys. Rev. Lett. (2020) 124, 205503
Key role of retardation and non-locality in sound propagation in amorphous solids as evidenced by a projection formalism,
Caroli C., Lemaître A.,
J. Chem. Phys. (2020) 153(14), 144502
Triggering granular avalanches with ultrasound,
Leópoldès J., Jia X., Tourin A., Mangeney A.,
Physical Review E (2020) 102(4),042901
Micro-Macro Acoustic Modeling of Heterogeneous Foams with Nucleation Perturbation,
Nguyen C.T., Guilleminot J., Detrez F., (…), Duval A., Perrot C.,
SAE Technical Papers (2020)
How does the presence of stevia glycosides impact surface bubbles stability?,
Miguet J., Fang Y., Rouyer F., Rio E.,
Colloids and Surfaces A (2020) 603, 125093
Trapping of swimming microalgae in foam: Trapping of swimming microalgae in foam,
Roveillo Q., Dervaux J., Wang Y., (…), Seuront L., Elias F. ,
Journal of the Royal Society Interface (2020) 17(168), 20200077
Lifetime of a single bubble on the surface of a water and ethanol bath,
Lorenceau E., Rouyer F. ,
Physical Review Fluids (2020) 5(6), 063603
Stability of big surface bubbles: Impact of evaporation and bubble size,
Miguet J., Pasquet M., Rouyer F., Fang Y., Rio E. ,
Soft Matter (2020) 16(4), pp. 1082-1090
Modelling the behaviour of bentonite pellet-powder mixtures upon hydration from dry granular state to saturated homogeneous state,
Darde B., Dangla P., Roux J.-N., (…), Vu M.N., Tang A.M.,
Engineering Geology (2020) 278, 105847
Modelling the hydromechanical behaviour of expansive granular mixtures upon hydration,
Darde B., Tang A.M., Pereira J.-M., (…), Talandier J., Vu M.N.,
E3S Web of Conferences (2020) 195,02006
Elasticity of model weakly cemented granular materials: A numerical study,
Theocharis A., Roux J.-N., Langlois V.,
International Journal of Solids and Structures (2020) 193-194, pp. 13-27
Experimental investigation on the grain-scale compression behavior of loose wet granular material,
Than V.-D., Aimedieu P., Pereira J.-M., Roux J.-N., Tang A.M.,
Acta Geotechnica (2020) 15(5), pp. 1039-1055
An assessment of discrete element approaches to infer intergranular forces from experiments on 2D granular media,
Tolomeo M., Richefeu V., Combe G., Roux J.N., Viggiani G.,
International Journal of Solids and Structures (2020) 187, pp. 48-57
Modelling the hydromechanical behaviour of a granular expansive clayey soil upon hydration using discrete element method,
Darde B., Roux J.-N., Dangla P., (…), Talandier J., Vu M.N.,
Lecture Notes in Civil Engineering (2020) 54, pp. 871-876
Investigating the hydromechanical behaviour of bentonite pellets by swelling pressure tests and discrete element modelling,
Darde B., Roux J.-N., Pereira J.-M., (…), Vu M.N., Tang A.M.,
Acta Geotechnica (2020) Article in Press
Density waves in shear-thickening suspensions,
Ovarlez G., Le A.V.N., Smit W.J., (…), Chatté G., Colin, A.,
Science Advances (2020) 6(16), eaay5589
A Bird-Cage Coil for MRI Studies of Unsaturated Granular Materials,
Marhbaie S., Takhedmit H., Poulichet P., Grzeskowiak M., Fall A.,
14th European Conference on Antennas and Propagation, EuCAP 2020, 9135692
Characterization of microcrystalline cellulose spheres and prediction of hopper flow based on a μ(I)-rheology model,
Remmelgas J., Fall A., Sasic S., (…), Marucci M., Boissier C.,
European Journal of Pharmaceutical Sciences (2020) 142, 105085
Robustness of cement-based materials: From dosage variations to yield stress fluctuations,
Zuo W., Bessaies-Bey H., Tian Q., Miao C., Roussel N.,
Cement and Concrete Research (2021) 139, 106260
Influence of flexible fibers on the yield stress of fresh cement pastes and mortars,
Sultangaliyeva F., Carré H., La Borderie C., (…), Keita E., Roussel N.,
Cement and Concrete Research (2020) 138, 106221
Water absorption of recycled aggregates: Measurements, influence of temperature and practical consequences,
Théréné F., Keita E., Naël-Redolfi J., (…), Bonafous L., Roussel N.,
Cement and Concrete Research (2020) 137, 106196
Numerical simulations of concrete processing: From standard formative casting to additive manufacturing,
Roussel N., Spangenberg J., Wallevik J., Wolfs R.,
Cement and Concrete Research (2020) 135, 106075
Additive manufacturing of cantilever – From masonry to concrete 3D printing,
Carneau P., Mesnil R., Roussel N., Baverel O.,
Automation in Construction (2020) 116, 103184
A process classification framework for defining and describing Digital Fabrication with Concrete,
Buswell R.A., da Silva W.R.L., Bos F.P., (…), Wangler T., Roussel N.,
Cement and Concrete Research (2020) 134, 106068
Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review,
Mechtcherine V., Bos F.P., Perrot A., (…), Sonebi M., Roussel N.,
Cement and Concrete Research (2020) 132, 106037
Contact and macroscopic ageing in colloidal suspensions,
Bonacci F., Chateau X., Furst E.M., (…), Goyon J., Lemaître A.,
Nature Materials (2020) 19(7), pp. 775-780
Progress in rheology and hydrodynamics allowed by NMR or MRI techniques,
Coussot P.,
Experiments in Fluids (2020) 61(9), 207
How Bound Water Regulates Wood Drying,
Penvern H., Zhou M., Maillet B., (…), Caré S., Coussot P.,
Physical Review Applied (2020) 14(5), 054051
Yielding, thixotropy, and strain stiffening of aqueous carbon black suspensions,
N’Gouamba E., Goyon J., Tocquer L., Oerther T., Coussot P.,
Journal of Rheology (2020) 64(4), pp. 955-968
Thermal fatigue and collapse of waxy suspensions,
Andrade D.E.V., Coussot P.,
Rheologica Acta (2020) 59(5), pp. 279-289
The liquid regime of waxy oils suspensions: A magnetic resonance velocimetry analysis,
Andrade D.E.V., Ferrari M., Coussot P.,
Journal of Non-Newtonian Fluid Mechanics (2020) 279, 104261
Magnetic Resonance Imaging of drying bitumen emulsions,
Goavec M., Rodts S., Gaudefroy V., Faure P., Coussot P.,
Colloids and Surfaces A (2020) 591, 124512
Mechanisms of liquid imbibition in Douglas-fir inferred from 1H nuclear magnetic resonance methods,
Nguyen D.M., Care S., Courtier-Murias D., Zhou M., Coussot P.,
Holzforschung (2020) Article in Press
Permeability of Monodisperse Solid Foams,
Pitois O., Kaddami A., Langlois V.,
Transport in Porous Media (2020) 134(3), pp. 635-649
Acoustics of monodisperse open-cell foam: An experimental and numerical parametric study,
Langlois V., Kaddami A., Pitois O., Perrot C.,
Journal of the Acoustical Society of America (2020) 148(3), pp. 1767-1778
Capillary imbibition in open-cell monodisperse foams,
Pitois O., Kaddami A., Langlois V.,
Journal of Colloid and Interface Science (2020) 571, pp. 166-173
Tensile mechanics of polymeric foam ribbons,
Mouquet A., Khidas Y., Chateau X., Saison T., Faou J.-Y., Pitois O.,
Polymer Testing (2020) 86, 106513
Drying of a Compressible Biporous Material,
Lerouge T., Maillet B., Coutier-Murias D., Pitois O., Coussot P.,
Physical Review Applied (2020) 13(4), 044061
Yield stress of aerated cement paste,
Feneuil B., Roussel N., Pitois O.,
Cement and Concrete Research (2020) 127, 105922
2019
Microstructural origin of compressive in situ stresses in electron-gun-evaporated silica thin films,
Gelin S., Poinot D., Chatel S., Calba P. J., Lemaître A.,
Physical Review Materials (2019) 3(5), 055608
Fluctuating elasticity fails to capture anomalous sound scattering in amorphous solids,
Caroli C., Lemaître A.,
Physical Review Letters (2019) 123(5), 055501
Electrical conductivity and tortuosity of solid foam: Effect of pore connections,
Langlois V., Trinh V.H., Perrot C.,
Physical Review E (2019) 100(1), 013115
Granular materials: Micromechanical approaches of model systems
Roux J.-N.,
CISM International Centre for Mechanical Sciences, Courses and Lectures (2019) 587, pp. 141-193
Nuclear Magnetic Resonance volumetric antenna,
Waguaf A., Fadel L., Vigneras V., (…), Takhedmit H., Grzeskowiak M.,
13th European Conference on Antennas and Propagation, EuCAP 2019, 8739602
Recent advances on yield stress and elasticity of fresh cement-based materials,
Roussel N., Bessaies-Bey H., Kawashima S., (…), Vasilic K., Wolfs R.,
Cement and Concrete Research (2019) 124, 105798
Weak bond strength between successive layers in extrusion-based additive manufacturing: measurement and physical origin,
Keita E., Bessaies-Bey H., Zuo W., Belin P., Roussel N.,
Cement and Concrete Research (2019) 123, 105787
Digital Concrete: A Review,
Wangler T., Roussel N., Bos F.P., Salet T.A.M., Flatt R.J.,
Cement and Concrete Research (2019) 123, 105780
Influence of non-adsorbing polymers on drying of fresh mortars,
Keita E., Rifaai Y., Belin P., Roussel N.,
Cement and Concrete Research (2019) 116, pp. 38-44
Durability of cement pastes exposed to external sulfate attack and leaching: Physical and chemical aspects,
Ragoug R., Metalssi O.O., Barberon F., (…), Divet L., d’Espinose de Lacaillerie J.-B.,
Cement and Concrete Research (2019) 116, pp. 134-145
Elastoplastic behavior of yield stress fluids,
N’Gouamba E., Goyon J., Coussot P.,
Physical Review Fluids (2019) 4(12), 123301
Self-Limited Accumulation of Colloids in Porous Media,
Gerber G., Bensouda M., Weitz D.A., Coussot P.,
Physical Review Letters (2019) 123(15), 158005
Some Observations on the Impact of a Low-Solubility Ionic Solution on Drying Characteristics of a Model Porous Medium,
Seck M.D., Keita E., Coussot P.,
Transport in Porous Media (2019) 128(3), pp. 915-928
Editorial: Saline Water Evaporation from Porous Media
Shokri N., Prat M., Coussot P.
Transport in Porous Media (2019) 128(3), pp. 857-859
Convective drying of a porous medium with a paste cover,
Ben Abdelouahab N., Gossard A., Rodts S., Coasne B., Coussot P.,
European Physical Journal E (2019) 42(5), 66
Saffman-Taylor instability in yield stress fluids: Theory-experiment comparison,
Fadoul O.A., Coussot P.,
Fluids (2019) 4(1), 53
Brittle solid collapse to simple liquid for a waxy suspension,
Andrade D.E.V., Coussot P.,
Soft Matter (2019) 15(43), pp. 8766-8777
Controlled imbibition in a porous medium from a soft wet material (poultice)
Ben Abdelouahab N., Gossard A., Marlière C., (…), Rodts S., Coussot P.,
Soft Matter (2019) 15(33), pp. 6732-6741
Stability criterion for fresh cement foams,
Feneuil B., Aimedieu P., Scheel M., (…), Roussel N., Pitois O.,
Cement and Concrete Research (2019) 125, 105865
A physical approach towards controlling the microstructure of metakaolin-based geopolymer foams,
Kaddami A., Pitois O.,
Cement and Concrete Research (2019) 124, 105807
Rheology of particulate rafts, films, and foams,
Pitois O., Rouyer F.,
Current Opinion in Colloid and Interface Science (2019) 43, pp. 125-137
Optimal cement paste yield stress for the production of stable cement foams,
Feneuil B., Roussel N., Pitois O.,
Cement and Concrete Research (2019) 120, pp. 142-151
Steady shear viscosity of semi-dilute bubbly suspensions,
Morini R., Chateau X., Ovarlez G., Pitois O., Tocquer L.,
Journal of Non-Newtonian Fluid Mechanics (2019) 264, pp. 19-24
Tuning membrane content of sound absorbing cellular foams: Fabrication, experimental evidence and multiscale numerical simulations,
Trinh V.H., Langlois V., Guilleminot J., (…), Khidas Y., Pitois O.,
Materials and Design (2019) 162, pp. 345-361
Well-controlled foam-based solid coatings,
Mouquet A., Khidas Y., Saison T., Faou J.-Y., Pitois O.,
Soft Matter (2019) 15(25), pp. 5084-5093
2018
Glass-like stress relaxation of a permanent gelatin network as a signature of pretransitional helix-coil fluctuations,
Caroli C., Ronsin O., Lemaître A.,
Journal of Chemical Physics (2018) 148(5), 054901
Stress correlations in glasses,
Lemaître A.,
Journal of Chemical Physics (2018) 149(10), 104107
Hydro-mechanical behaviour of high-density bentonite pellet on partial hydration,
Darde B., Tang A.M., Pereira J.-M., (…), Talandier J., Vu M.N.,
Geotechnique Letters (2018) 8(4), pp. 330-335
Inertial shear flow of assemblies of frictionless polygons: Rheology and microstructure
Azéma É., Radjaï F., Roux J.-N.,
European Physical Journal E (2018) 41(1), 2
Rheology and microstructure of unsaturated wet granular materials: Experiments and simulations,
Badetti M., Fall A., Hautemayou D., (…), Rodts S., Roux J.-N.,
Journal of Rheology (2018) 62(5), pp. 1175-1186
Shear strength of wet granular materials: Macroscopic cohesion and effective stress: Discrete numerical simulations, confronted to experimental measurements,
Badetti M., Fall A., Chevoir F., Roux J.-N.,
European Physical Journal E (2018) 41(5), 68
Rheological requirements for printable concretes,
Roussel N.,
Cement and Concrete Research (2018) 112, pp. 76-85
The role of early age structural build-up in digital fabrication with concrete,
Reiter L., Wangler T., Roussel N., Flatt R.J.,
Cement and Concrete Research (2018) 112, pp. 86-95
Non-adsorbing polymers and yield stress of cement paste: Effect of depletion forces,
Bessaies-Bey H., Palacios M., Pustovgar E., (…), Flatt R.J., Roussel N.,
Cement and Concrete Research (2018) 111, pp. 209-217
Water absorption measurement of fine porous aggregates using an evaporative method: Experimental results and physical analysis,
Naël-Redolfi J., Keita E., Roussel N.
Cement and Concrete Research (2018) 104, pp. 61-67
Robustness of self-compacting recycled concrete: analysis of sensitivity parameters,
González-Taboada I., González-Fonteboa B., Martínez-Abella F., Roussel N.,
Materials and Structures/Materiaux et Constructions (2018) 51(1), 8
Hybrid Discretization Methods with Adaptive Yield Surface Detection for Bingham Pipe Flows,
Cascavita K.L., Bleyer J., Chateau X., Ern A.,
Journal of Scientific Computing (2018) 77(3), pp. 1424-1443
Pair-particle trajectories in a shear flow of a Bingham fluid,
Fahs H., Ovarlez G., Chateau X.,
Journal of Non-Newtonian Fluid Mechanics (2018) 261, pp. 171-187
Rheology signature of flocculated silica suspensions,
Fusier J., Goyon J., Chateau X., Toussaint F.,
Journal of Rheology (2018) 62(3), 5031897
Complex-fluid approach for determining rheological characteristics of fine-grained soils and clay minerals,
Rakshith S., Zhang X., Coussot P., Singh D.N.,
Journal of Materials in Civil Engineering (2018) 30(12), 04018322
Wall slip mechanisms in direct and inverse emulsions,
Zhang X., Lorenceau E., Bourouina T., (…), Goyon J., Coussot P.,
Journal of Rheology (2018) 62(6), pp. 1495-1513
Magnetic resonance imaging evidences of the impact of water sorption on hardwood capillary imbibition dynamics,
Zhou M., Caré S., Courtier-Murias D., (…), Rodts S., Coussot P.,
Wood Science and Technology (2018) 52(4), pp. 929-955
Particle-Size-Exclusion Clogging Regimes in Porous Media,
Gerber G., Rodts S., Aimedieu P., Faure P., Coussot P.,
Physical Review Letters (2018) 120(14), 148001
Yielding and Flow of Soft-Jammed Systems in Elongation
Zhang X., Fadoul O., Lorenceau E., Coussot P.,
Physical Review Letters (2018) 120(4), 048001
Slow flows of yield stress fluids: yielding liquids or flowing solids?,
Coussot, P.,
Rheologica Acta (2018) 57(1), pp. 1-14
Strengthening and drying rate of a drying emulsion layer,
Goavec M., Rodts S., Gaudefroy V., (…), Chateau X., Coussot P.,
Soft Matter (2018) 14(42), pp. 8612-8626
Permeability of solid foam: Effect of pore connections,
Langlois V., Trinh V.H., Lusso C., (…), Khidas Y., Pitois O.,
Physical Review E (2018) 97(5), 053111
Viscous friction of squeezed bubbly liquid layers,
Morini R., Chateau X., Ovarlez G., Pitois O., Tocquer L.,
Soft Matter (2018) 14(41), pp. 8372-8377
Synergistic actions of mixed small and large pores for capillary absorption through biporous polymeric materials,
Lerouge T., Pitois O., Grande D., Le Droumaguet B., Coussot P.,
Soft Matter (2018) 14(40), pp. 8137-8146
2017
Effects of disorder and chain stiffening on the elasticity of flexible polymer networks,
Caroli C., Lemaître A.,
Physical Review E (2017) 95(3), 032501
Inherent stress correlations in a quiescent two-dimensional liquid : Static analysis including finite-size effects,
Lemaître A.,
Physical Review E (2017), 96(5), 052101
Viscosity of particle laden films,
Timounay Y., Rouyer F.,
EPJ Web of Conferences (2017) 140, 09026
Yield-stress fluid deposition in circular channels,
Laborie B., Rouyer F., Angelescu D.E., Lorenceau E.,
Journal of Fluid Mechanics (2017) 818, pp. 838-851
Viscosity of particulate soap films: Approaching the jamming of 2D capillary suspensions,
Timounay Y., Rouyer F.,
Soft Matter (2017) 13(18), pp. 3449-3456
Low gas permeability of particulate films slows down the aging of gas marbles,
Timounay Y., Ou E., Lorenceau E., Rouyer F.,
Soft Matter (2017) 13(42), pp. 7717-7720
3D particle shape modelling and optimization through proper orthogonal decomposition: Application to Railway Ballast,
Ouhbi N., Voivret C., Perrin G., Roux J.-N.,
Granular Matter (2017) 19(4), 86
Discrete Digital Projections Correlation: A Reconstruction-Free Method to Quantify Local Kinematics in Granular Media by X-ray Tomography,
Khalili M.H., Brisard S., Bornert M., (…), Pereira J.-M., Roux J.-N.,
Experimental Mechanics (2017) 57(6), pp. 819-830
Influence of 3D particle shape on the mechanical behaviour through a novel characterization method,
Ouhbi N., Voivret C., Perrin G., Roux J.-N.,
EPJ Web of Conferences (2017) 140, 06027
Assessing contact forces in granular materials from experimental measurements of kinematics,
Tolomeo M., Richefeu V., Combe G., Roux J.-N., Viggiani G.,
EPJ Web of Conferences (2017) 140, 02012
Investigation into macroscopic and microscopic behaviors of wet granular soils using discrete element method and X-ray computed tomography,
Than V.-D., Tang A.-M., Roux J.-N., (…), Aimedieu P., Bornert M.,
EPJ Web of Conferences (2017) 140, 08018
A DEM study of oedometric compression of model granular materials Initial state influence, stress ratio, elasticity, irreversibility,
Khalili M.H., Roux J.-N., Brisard S., Pereira J.-M., Bornert M.,
EPJ Web of Conferences (2017) 140, 02028
Modeling granular materials: Century-long research across scales,
Radjai F., Roux J.-N., Daouadji A.,
Journal of Engineering Mechanics (2017) 143(4), 04017002
Numerical study of one-dimensional compression of granular materials. I. Stress-strain behavior, microstructure, and irreversibility,
Khalili M.H., Roux J.-N., Pereira J.-M., Brisard S., Bornert M.,
Physical Review E (2017) 95(3),032907
Numerical study of one-dimensional compression of granular materials. II. Elastic moduli, stresses, and microstructure,
Khalili M.H., Roux J.-N., Pereira J.-M., Brisard S., Bornert M.,
Physical Review E (2017) 95(3), 032908
Basic mechanical properties of wet granular materials: A DEM study,
Than V.D., Khamseh S., Tang A.M., (…), Chevoir F., Roux J.-N.,
Journal of Engineering Mechanics (2017) 143(1), C4016001
Discontinuous Shear Thickening in Cornstarch Suspensions,
Fall A., Lemaître A., Ovarlez G.,
EPJ Web of Conferences (2017) 140, 09001
Dry granular flows – Rheological measurements of the μ (I) – Rheology,
Fall A., Badetti M., Ovarlez G., Chevoir F., Roux J.-N.,
EPJ Web of Conferences (2017) 140, 03005
Rheology of wet granular materials under continuous shear: Experiments and simulations,
Badetti M., Fall A., Roux J.-N.,
EPJ Web of Conferences (2017) 140, 08019
Unexpected Rheological Behavior of Concentrated Poly(methacrylic acid) Aqueous Solutions,
Robin C., Lorthioir C., Amiel C., (…), Ovarlez G., Le Cœur C.,
Macromolecules (2017) 50(2), pp. 700-710
The heterogeneous nature of bleeding in cement pastes,
Massoussi N., Keita E., Roussel N.,
Cement and Concrete Research (2017) 95, pp. 108-116
Numerical Modeling of Disordered Foam in 3D: Effective Properties by Homogenization,
Lusso C., Chateau X.,
Poromechanics 2017 – Proceedings of the 6th Biot Conference on Poromechanics, pp. 1347-1354
Wall Slip of Soft-Jammed Systems: A Generic Simple Shear Process,
Zhang X., Lorenceau E., Basset P., (…), Goyon J., Coussot P.,
Physical Review Letters (2017) 119(20), 208004
Drying regimes in homogeneous porous media from macro- to nanoscale,
Thiery J., Rodts S., Weitz D.A., Coussot P.,
Physical Review Fluids (2017) 2(7), 074201
Transport and Adsorption of Nano-Colloids in Porous Media Observed by Magnetic Resonance Imaging,
Lehoux A.P., Faure P., Michel E., (…), Rodts S., Coussot P.,
Transport in Porous Media (2017) 119(2), pp. 403-423
NMR observation of water transfer between a cement paste and a porous medium,
Fourmentin M., Faure P., Rodts S., (…), Daviller D., Coussot P.,
Cement and Concrete Research (2017) 95, pp. 56-64
Bingham’s heritage,
Coussot P.,
Rheologica Acta (2017) 56(3), pp. 163-176
Introduction: yield stress—or 100 years of rheology,
Coussot P., Malkin A.Y., Ovarlez G.,
Rheologica Acta (2017) 56(3), pp. 161-162
Yield stress and minimum pressure for simulating the flow restart of a waxy crude oil pipeline,
Mendes R., Vinay G., Coussot P. ,
Energy and Fuels (2017) 31(1), pp. 395-407
Mudflow rheology and dynamics (Book)
Coussot P.,
Mudflow Rheology and Dynamics (2017) pp. 1-255
Combined time-lapse magnetic resonance imaging and modeling to investigate colloid deposition and transport in porous media,
Lehoux A.P., Faure P., Lafolie F., (…), Coussot P., Michel E.,
Water Research (2017) 123, pp. 12-20
Effect of surfactants on the yield stress of cement paste,
Feneuil B., Pitois O., Roussel N.,
Cement and Concrete Research (2017) 100, pp. 32-39
Yielding of complex liquid foams,
Gorlier F., Khidas Y., Pitois O.,
Journal of Rheology (2017), 61(5), pp. 919-930
Coupled elasticity in soft solid foams,
Gorlier F., Khidas Y., Pitois O.,
Journal of Colloid and Interface Science (2017) 501, pp. 103-111
Gas Marbles: Much Stronger than Liquid Marbles,
Timounay Y., Pitois O., Rouyer F.,
Physical Review Letters (2017) 118(22), 228001
Optimal strengthening of particle-loaded liquid foams,
Gorlier F., Khidas Y., Fall A., Pitois O.,
Physical Review E (2017) 95(4), 042604
Yielding and flow of foamed metakaolin pastes,
Ducloué L., Pitois O., Tocquer L., Goyon J., Ovarlez G.,
Colloids and Surfaces A (2017) 513, pp. 87-94
Elasticity of particle-loaded liquid foams,
Gorlier F., Khidas Y., Pitois O.,
Soft Matter (2017) 13(25), pp. 4533-4540
A Systematic Link between Microstructure and Acoustic Properties of Foams: A Detailed Study on the Effect of Membranes,
Trinh V.H., Hoang M.T., Perrot C., (…), Khidas Y., Pitois O.,
Poromechanics 2017 – Proceedings of the 6th Biot Conference on Poromechanics, pp. 1405-1412