Geotech Young Seminar Series: Blaise Pascal Allo (Navier)
Numerical Analysis of a TBM-Excavated Drift in Callovo-Oxfordian Claystone: Insights from the GRD4 Experimental Drift at the Meuse/Haute-Marne Underground Research Laboratory
Abstract:
Built and operated by the French National Agency for Radioactive Waste Management (ANDRA) since the early 2000s, the Meuse/Haute-Marne underground research laboratory (M/HM URL) is designed for scientific experiments and demonstrations aimed at proving the feasibility and constructability of geological disposal of radioactive waste in Callovo-Oxfordian claystone (Cigéo project). It consists of a network of drifts excavated in the directions of the main horizontal stresses (~12.4 MPa et ~16.1 MPa). Some drifts are designed to analyse rock-structure interaction, to test and to improve different support systems. Analysing the behaviour of these types of drift will provide valuable insights for the design of future Cigéo Project structures.
This work focuses on the 6.37 m diameter GRD4 drift which was excavated by a tunnel boring machine (TBM) in the direction of the major horizontal stress, thus under an initial quasi-isotropic stress state. In-situ observations revealed: (i) a fractured zone induced by excavation around the drift and more developed in the horizontal direction of the cross section; (ii) a network of fractures on the vault which are more extensive than those observed in drifts excavated using conventional methods and oriented in the same direction; (iii) an anisotropic loading of the segment lining.
A numerical analysis is performed, in which the fractured zone observed around the GRD4 drift is explicitly modelled with elastoplastic and viscoelastic properties that differ from those of the intact rock. The mechanical parameters of the fractured zone were calibrated using displacement measurements in the rock mass and strain measurements in the lining. Calibration is a key aspect of the study, and a sensitivity of the model parameters has been performed. The influence of the excavation process (conventional or mechanized) is also discussed. Subsequently, various numerical simulations were conducted to highlight how the annular gap filling sequence and material interface quality influence the short- and long-term response of the structure. The effect of the backfill material on the loading of the lining is also investigated.
Short bio:
After his engineering studies at Ecole Nationale des Ponts et Chaussées (ENPC), Blaise-Pascal Allo started a PhD at Laboratoire Navier under supervision of Jean Sulem, Lina-María Guayacán-Carrillo and Eric Boidy (ANDRA). His research focuses on rock mechanics and the numerical modelling of underground structures. By combining in-situ data with numerical simulations, he aims to develop an engineering-based approach for designing support systems for drifts excavated in Callovo-Oxfordian claystone.


